CS2VkbZz3rjH7UzZTUsLDYH7O25fYRoviPYK8eym3XtVhE JACKZ Crosshair Code
JACKZ uses a green static cross crosshair with length 9, gap 3 and thickness 2 and an outline. The code below is in the new format CS2 imports since the September 2026 update; import it in Settings → Game → Crosshair.
Share code New CS2 format
CShckXjwhOzfdwaEEBEc5WMk8wqsDr53M4BH9G9qZdMXzB Verified Apr 1, 2026 · Checksum OK
This player has not published a new-format code yet, so this one is converted from their last CS:GO-era code, CSGO-aEGLu-5mZds-w9NsK-ey5v8-oSqNO, which CS2 no longer imports. Sizes moved to pixels and can land one pixel off; the preview shows the result.
Plaster
Concrete
Mossy stone
Wood
Stone wall
Brick
Sand
Sky
Dark
Large preview at 4x zoom, drawn in CS2 pixels at 1080p. Tiles at 2x on nine common surfaces so you can check visibility before importing.
JACKZ's crosshair settings
- Style
- Static Cross
- Length
- 9
- Gap
- 3
- Thickness
- 2
- Outline
- Full
- Centre dot
- Off
- Colour
- Green
- RGB
- 50, 250, 50
- Alpha
- 200
- T-style
- Off
- Follow recoil
- Off
- Outline colour
- 0, 0, 0
- Built at
- 1080p
Console commands
| Setting | Command | Value |
|---|---|---|
| Style | cl_crosshairstyle | 4 |
| Length | cl_crosshair_length | 9 |
| Gap | cl_crosshair_gap | 3 |
| Thickness | cl_crosshair_thickness | 2 |
| Center dot | cl_crosshairdot | 0 |
| Outline (0 off, 1 full, 2 half) | cl_crosshair_drawoutline | 1 |
| Red | cl_crosshaircolor_r | 50 |
| Green | cl_crosshaircolor_g | 250 |
Show all 24 commands
| Blue | cl_crosshaircolor_b | 50 |
| Alpha | cl_crosshaircolor_a | 200 |
| T-style | cl_crosshair_t | 0 |
| Follow recoil | cl_crosshair_recoil | 0 |
| Outline red | cl_crosshairoutline_r | 0 |
| Outline green | cl_crosshairoutline_g | 0 |
| Outline blue | cl_crosshairoutline_b | 0 |
| Outline alpha | cl_crosshairoutline_a | 200 |
| Dynamic spread limit | cl_crosshair_dynamic_spread_limit | 255 |
| Split distance | cl_crosshair_dynamic_splitdist | 5 |
| Inner split alpha | cl_crosshair_dynamic_splitalpha_innermod | 1 |
| Outer split alpha | cl_crosshair_dynamic_splitalpha_outermod | 0.3 |
| Split size ratio | cl_crosshair_dynamic_maxdist_splitratio | 0 |
| Screen height | cl_crosshair_screen_height | 1080 |
| Scope dot scale | cl_ironsight_dot_scale | 1 |
| Scope dot uses crosshair colour | cl_ironsight_usecrosshaircolor | 0 |
How to import JACKZ's crosshair
- Click Copy code above.
- In CS2 open Settings → Game → Crosshair and click Share or Import.
- Paste the code and press Import. The crosshair updates immediately.
Prefer the console? Enable the developer console in Settings → Game, press ~ and run apply_crosshair_code CShckXjwhOzfdwaEEBEc5WMk8wqsDr53M4BH9G9qZdMXzB. You can also bind it to a key to switch crosshairs mid-match: bind F5 "apply_crosshair_code CShckXjwhOzfdwaEEBEc5WMk8wqsDr53M4BH9G9qZdMXzB".
Similar crosshairs
CS4N3cTLGtbqN5JxffWv6vBB5dqiCwEP55KQhZQ4bJ4JQE CS4N3cTLGtbqN5JxffWv6vBB5dqiCwEP55KQhZQ4bJ4JQE CSDcomrJBKpqwRGP3676xoNKTGhHdCOaZ6xY5v5wUQHzyD JACKZ crosshair FAQ
What crosshair code does JACKZ use in CS2?
JACKZ's crosshair code in the new CS2 format is CShckXjwhOzfdwaEEBEc5WMk8wqsDr53M4BH9G9qZdMXzB. It was last verified on Apr 1, 2026.
Does JACKZ's old CSGO- crosshair code still work?
No. Since the September 2026 crosshair update CS2 only imports codes that start with CS and have no dashes, so older CSGO- codes for JACKZ are rejected. Use the code above instead.
What are JACKZ's crosshair settings?
JACKZ uses a static cross style, length 9, gap 3, thickness 2, no centre dot, full outline, green (RGB 50, 250, 50), alpha 200. The full console command list is in the table above.
How do I get JACKZ's crosshair?
Copy the code, open CS2, go to Settings → Game → Crosshair, click Share or Import, paste and import. Or run apply_crosshair_code CShckXjwhOzfdwaEEBEc5WMk8wqsDr53M4BH9G9qZdMXzB in the console.
Source: www.cscdb.net. Settings decoded from the share code, in pixels. Team and role as of the verified date.