CSfSQt6wxXdaV3OxDRzaS6FoQX2ortyyinwaXvwsNiJAcV Dot Crosshair Codes for CS2
A dot crosshair strips the four lines away and leaves a single point. It gives the cleanest view of the target and forces you to trust your spray control, which is why some rifle-heavy players run it. It is harder to track recoil with, so it suits players who already know the spray patterns. Since the September 2026 update it has its own style, Dot Only.
- Set cl_crosshairstyle 6 for Dot Only, or keep a cross style with cl_crosshair_length 0 and cl_crosshairdot 1. The dot size comes from cl_crosshair_thickness.
- Use a full or half outline so the dot stays visible on bright walls.
- A thickness of 3 to 5 pixels is the sweet spot at 1080p. Below that the dot gets lost.
9 pro players using a dot crosshair
Membership is decided by decoding each code, so this list stays accurate when players change settings. Verified Sep 4, 2026.
CSST2rJYT26v5xtE7q4dRpcRHhnL24eO8rmeN84tNiJAcV CSBW6iv5sUhMexh7N4xoGQa4kwPifUO72LWkRnQQmBpbqE hampus
- Length
- 0
- Gap
- 1
- Thick
- 2
CSkMxWK5epnEDGvQx58vZi6U8UEwkhnwOFO6MrDS9qH4WK CSfSQt6wxXdaV3OxDRzaS6FoQX2ortyyinwaXvwsNiJAcV CSp4Mnp56nMhkLiNowGxySaukatOMjaMrwynAPRBPXVfYD CSBjeviKkYVtvJdRbB3bZmzQd8fMuTLcbkEjnE6V7ARnhD CSXo4DwuhavHxnRE92mCwWTwxyTZMHxXSSV9rSTByKpxfG CS77msuw7tR8bKAO3fQhizZ5DRpMyQWeqM2YnDccnx9MuV Console commands for the dot preset
Paste these into the console to apply the preset without a share code, or change single values to fine-tune it. The full list of crosshair commands with ranges and defaults is in the commands guide.
Console commands
| Setting | Command | Value |
|---|---|---|
| Style | cl_crosshairstyle | 6 |
| Length | cl_crosshair_length | 0 |
| Gap | cl_crosshair_gap | 2 |
| Thickness | cl_crosshair_thickness | 4 |
| Center dot | cl_crosshairdot | 0 |
| Outline (0 off, 1 full, 2 half) | cl_crosshair_drawoutline | 1 |
| Red | cl_crosshaircolor_r | 0 |
| Green | cl_crosshaircolor_g | 255 |
Show all 24 commands
| Blue | cl_crosshaircolor_b | 145 |
| Alpha | cl_crosshaircolor_a | 255 |
| T-style | cl_crosshair_t | 0 |
| Follow recoil | cl_crosshair_recoil | 0 |
| Outline red | cl_crosshairoutline_r | 0 |
| Outline green | cl_crosshairoutline_g | 0 |
| Outline blue | cl_crosshairoutline_b | 0 |
| Outline alpha | cl_crosshairoutline_a | 255 |
| Dynamic spread limit | cl_crosshair_dynamic_spread_limit | 255 |
| Split distance | cl_crosshair_dynamic_splitdist | 3 |
| Inner split alpha | cl_crosshair_dynamic_splitalpha_innermod | 0 |
| Outer split alpha | cl_crosshair_dynamic_splitalpha_outermod | 1 |
| Split size ratio | cl_crosshair_dynamic_maxdist_splitratio | 1 |
| Screen height | cl_crosshair_screen_height | 1080 |
| Scope dot scale | cl_ironsight_dot_scale | 1 |
| Scope dot uses crosshair colour | cl_ironsight_usecrosshaircolor | 0 |
Other crosshair styles
Dot crosshair FAQ
Which pros use a dot crosshair in CS2?
NiKo, 957, dgt, hampus, MATYS, mopoz and 3 more currently use a dot crosshair.
How do I make a dot crosshair in CS2?
Copy the preset code above and import it, or open the generator with the preset loaded and adjust from there. Set cl_crosshairstyle 6 for Dot Only, or keep a cross style with cl_crosshair_length 0 and cl_crosshairdot 1. The dot size comes from cl_crosshair_thickness.
Is a dot crosshair good for CS2?
A dot crosshair strips the four lines away and leaves a single point. It gives the cleanest view of the target and forces you to trust your spray control, which is why some rifle-heavy players run it. It is harder to track recoil with, so it suits players who already know the spray patterns. Since the September 2026 update it has its own style, Dot Only.