CSGAwV2PanHKkupYryusMw65JyT3kzuuKB3rezTbCLT4Qh Jame Crosshair Code
Dzhami Ali
Jame uses a white static cross crosshair with length 2, gap 0 and thickness 1, with a centre dot and an outline. The code below is in the new format CS2 imports since the September 2026 update; import it in Settings → Game → Crosshair.
Share code New CS2 format
CShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW Verified Oct 5, 2026 · Checksum OK
Plaster
Concrete
Mossy stone
Wood
Stone wall
Brick
Sand
Sky
Dark
Large preview at 4x zoom, drawn in CS2 pixels at 1080p. Tiles at 2x on nine common surfaces so you can check visibility before importing.
Jame's crosshair settings
- Style
- Static Cross
- Length
- 2
- Gap
- 0
- Thickness
- 1
- Outline
- Full
- Centre dot
- On
- Colour
- White
- RGB
- 250, 250, 250
- Alpha
- 255
- T-style
- Off
- Follow recoil
- Off
- Outline colour
- 0, 0, 0
- Built at
- 960p
Console commands
| Setting | Command | Value |
|---|---|---|
| Style | cl_crosshairstyle | 4 |
| Length | cl_crosshair_length | 2 |
| Gap | cl_crosshair_gap | 0 |
| Thickness | cl_crosshair_thickness | 1 |
| Center dot | cl_crosshairdot | 1 |
| Outline (0 off, 1 full, 2 half) | cl_crosshair_drawoutline | 1 |
| Red | cl_crosshaircolor_r | 250 |
| Green | cl_crosshaircolor_g | 250 |
Show all 24 commands
| Blue | cl_crosshaircolor_b | 250 |
| Alpha | cl_crosshaircolor_a | 255 |
| T-style | cl_crosshair_t | 0 |
| Follow recoil | cl_crosshair_recoil | 0 |
| Outline red | cl_crosshairoutline_r | 0 |
| Outline green | cl_crosshairoutline_g | 0 |
| Outline blue | cl_crosshairoutline_b | 0 |
| Outline alpha | cl_crosshairoutline_a | 255 |
| Dynamic spread limit | cl_crosshair_dynamic_spread_limit | 227 |
| Split distance | cl_crosshair_dynamic_splitdist | 3 |
| Inner split alpha | cl_crosshair_dynamic_splitalpha_innermod | 0 |
| Outer split alpha | cl_crosshair_dynamic_splitalpha_outermod | 1 |
| Split size ratio | cl_crosshair_dynamic_maxdist_splitratio | 1 |
| Screen height | cl_crosshair_screen_height | 960 |
| Scope dot scale | cl_ironsight_dot_scale | 1 |
| Scope dot uses crosshair colour | cl_ironsight_usecrosshaircolor | 0 |
How to import Jame's crosshair
- Click Copy code above.
- In CS2 open Settings → Game → Crosshair and click Share or Import.
- Paste the code and press Import. The crosshair updates immediately.
Prefer the console? Enable the developer console in Settings → Game, press ~ and run apply_crosshair_code CShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW. You can also bind it to a key to switch crosshairs mid-match: bind F5 "apply_crosshair_code CShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW".
PARIVISION teammates
Full rosterCSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA CS8MZWryYFiBbOJb5cHqtaMLJe4FVZNKHdfmiSfdVHvisb CSLKZv9bc9DASP2CkU7TN7nKt3pXAb2yzGYwEP2AJFPrGm Similar crosshairs
CSoQ72oKX4cmEcOA99w7NhZTZiZxJOYeEnPaemsEGYXaRe CSfPAM9V2iUOAh3BzMrS3RxpAs4RUcqv4RWXsKeaxBThZe CSivQoYXsW2hdHAGp25SSX8Ej3HOvf2yvvRByq2c9aSJCX CSGAwV2PanHKkupYryusMw65JyT3kzuuKB3rezTbCLT4Qh Jame crosshair FAQ
What crosshair code does Jame use in CS2?
Jame's crosshair code in the new CS2 format is CShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW. It was last verified on Oct 5, 2026.
Does Jame's old CSGO- crosshair code still work?
No. Since the September 2026 crosshair update CS2 only imports codes that start with CS and have no dashes, so older CSGO- codes for Jame are rejected. Use the code above instead.
What are Jame's crosshair settings?
Jame uses a static cross style, length 2, gap 0, thickness 1, centre dot on, full outline, white (RGB 250, 250, 250), alpha 255. The full console command list is in the table above.
How do I get Jame's crosshair?
Copy the code, open CS2, go to Settings → Game → Crosshair, click Share or Import, paste and import. Or run apply_crosshair_code CShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW in the console.
Source: www.xhair.pro. Settings decoded from the share code, in pixels. Team and role as of the verified date.