CSGAwV2PanHKkupYryusMw65JyT3kzuuKB3rezTbCLT4Qh FL1T Crosshair Code
FL1T uses a mint static cross crosshair with length 2, gap 1 and thickness 1 and no outline. The code below is in the new format CS2 imports since the September 2026 update; import it in Settings → Game → Crosshair.
Share code New CS2 format
CSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA Verified Oct 5, 2026 · Checksum OK
Plaster
Concrete
Mossy stone
Wood
Stone wall
Brick
Sand
Sky
Dark
Large preview at 4x zoom, drawn in CS2 pixels at 1080p. Tiles at 2x on nine common surfaces so you can check visibility before importing.
FL1T's crosshair settings
- Style
- Static Cross
- Length
- 2
- Gap
- 1
- Thickness
- 1
- Outline
- Off
- Centre dot
- Off
- Colour
- Mint
- RGB
- 0, 255, 165
- Alpha
- 255
- T-style
- Off
- Follow recoil
- Off
- Built at
- 800p
Console commands
| Setting | Command | Value |
|---|---|---|
| Style | cl_crosshairstyle | 4 |
| Length | cl_crosshair_length | 2 |
| Gap | cl_crosshair_gap | 1 |
| Thickness | cl_crosshair_thickness | 1 |
| Center dot | cl_crosshairdot | 0 |
| Outline (0 off, 1 full, 2 half) | cl_crosshair_drawoutline | 0 |
| Red | cl_crosshaircolor_r | 0 |
| Green | cl_crosshaircolor_g | 255 |
Show all 24 commands
| Blue | cl_crosshaircolor_b | 165 |
| Alpha | cl_crosshaircolor_a | 255 |
| T-style | cl_crosshair_t | 0 |
| Follow recoil | cl_crosshair_recoil | 0 |
| Outline red | cl_crosshairoutline_r | 0 |
| Outline green | cl_crosshairoutline_g | 0 |
| Outline blue | cl_crosshairoutline_b | 0 |
| Outline alpha | cl_crosshairoutline_a | 255 |
| Dynamic spread limit | cl_crosshair_dynamic_spread_limit | 189 |
| Split distance | cl_crosshair_dynamic_splitdist | 2 |
| Inner split alpha | cl_crosshair_dynamic_splitalpha_innermod | 0 |
| Outer split alpha | cl_crosshair_dynamic_splitalpha_outermod | 1 |
| Split size ratio | cl_crosshair_dynamic_maxdist_splitratio | 1 |
| Screen height | cl_crosshair_screen_height | 800 |
| Scope dot scale | cl_ironsight_dot_scale | 1 |
| Scope dot uses crosshair colour | cl_ironsight_usecrosshaircolor | 0 |
How to import FL1T's crosshair
- Click Copy code above.
- In CS2 open Settings → Game → Crosshair and click Share or Import.
- Paste the code and press Import. The crosshair updates immediately.
Prefer the console? Enable the developer console in Settings → Game, press ~ and run apply_crosshair_code CSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA. You can also bind it to a key to switch crosshairs mid-match: bind F5 "apply_crosshair_code CSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA".
PARIVISION teammates
Full rosterCShRKw4iuRavYQumGNHdDN7dsnFhRoENMYG6L4bkXrwZCW CS8MZWryYFiBbOJb5cHqtaMLJe4FVZNKHdfmiSfdVHvisb CSLKZv9bc9DASP2CkU7TN7nKt3pXAb2yzGYwEP2AJFPrGm Similar crosshairs
CS5x9FEN2MGKqKTPwD8dQPwbZ7xQ4YMUf7ZUu7XoPENwOK CSYH8MhbRy9td38bjSLiVoujN2cvtaNySWKu3meaZfV3PF CS9OnAn2QDfOrzPPVXpRxoixGKCKXwEFEeN4kMEeLtou9A CSYFU24jTPdcCH6zFiBnLYXWHMiCcnSxpV2eOzYkSmZEZB FL1T crosshair FAQ
What crosshair code does FL1T use in CS2?
FL1T's crosshair code in the new CS2 format is CSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA. It was last verified on Oct 5, 2026.
Does FL1T's old CSGO- crosshair code still work?
No. Since the September 2026 crosshair update CS2 only imports codes that start with CS and have no dashes, so older CSGO- codes for FL1T are rejected. Use the code above instead.
What are FL1T's crosshair settings?
FL1T uses a static cross style, length 2, gap 1, thickness 1, no centre dot, no outline, mint (RGB 0, 255, 165), alpha 255. The full console command list is in the table above.
How do I get FL1T's crosshair?
Copy the code, open CS2, go to Settings → Game → Crosshair, click Share or Import, paste and import. Or run apply_crosshair_code CSVwm4hdM42kKnG3aayZtP2pKzFLaemHSvc2tHpxVNsaiA in the console.
Source: www.xhair.pro. Settings decoded from the share code, in pixels. Team and role as of the verified date.